Eagles Nest ENST-C2460T-84 Silverweave Indigo & Sula Marina
finch's Nest FNSTO-BS2-2480L-42 Formica Folkstone & Mayer Silverweave Spring
Sometimes you just need a place where you can curl up and really "get into" your work. Reading a book? Manipulating information on a tablet or a laptop? Maybe you just need a place to perch for a little while and completely disconnect. The Nest is the perfect place for you to carve out your space.
Front & Back Panels: Back panel is 3/4” thick melamine or high pressure laminate. Open Nest units have PVC-banded cutout. Front panel on Open Nest units are also 3/4” thick melamine or high pressure laminate.
End Panels: End Panels are 1” thick melamine or high pressure laminate and are banded with 3mm PVC on all edges.
Top: Top consists of the main top and a sub-top for rigidity. Main top is 3/4” melamine or high pressure laminate. Edges are banded with 3mm PVC on all sides.
Base Assembly (for Closed Nest units): Fully Upholstered Base is constructed of 18mm plywood frame with a 2” thick high density upholstery foam seat cushion. The base is fully upholstered. The base assembly sits on 4 self-leveling glides.
Storage Base Assembly (for Open Nest Units): Base includes a 4” toe assembly and three 18” wide and 6-3/4”H storage spaces. The storage space is defined by a 1” thick melamine or high pressure laminate top and bottom with 3/4” thick melamine or high pressure laminate dividers between the storage spaces. All edges are banded with 3mm PVC.
Tapered Side Cushions (for Closed Nest units): Side cushions are 2360 upholstery foam constructed on an 11/16 particle board core. The thickness of each side cushion is tapered from 3” thick at the top to 12” thick at the base. Each tapered side cushion is attached to the unit with high strength hook and loop fasteners.
Seat and Tapered Side Cushions (for Open Nest units): Seat cushion is 1-1/2” firm upholstery foam on a 3/4” particle board core. Each side cushion is 21-5/8” wide and 40” high. The thickness of each side cushion is tapered from 3” thick at the top to 6-1/8” thick at the base. Each tapered side cushion is attached to the unit with high strength hook and loop fasteners.
Display Shelves (for Open Nest with Display Shelves): Each side of unit has two 1” thick melamine or high pressure laminate adjustable shelves. Edges are banded with 3mm PVC.
Depths: 20", 24"
Widths: 48", 60"
Seat Height: 18"
Overall Heights: 54", 72", 84"
Open Nest w/ Display Shelves Dimensions
Seat Height: 18"
Overall Height: 42"
Coordinating PVC and HPL finishes are available for most melamine selections. PVC not available for Stainless Aluminum.
PVC Applies to front edges as well as work surface edges in 3mm PVC.
* Indicates available for work surfaces only.
Seating+ Laminates for shell chairs and more is a collection of standard laminates for shell chair use.
Some of these patterns/colors are also available for tables.
These are special laminates selected for our Bella and Romak seating.
Can combine these laminates for a unique "front/back" appearance.
Minimum order: 10 (of the same laminate). Orders of less than 10 of the same laminate will incur an upcharge. Laminate choices outside of this range of selections will incur A set up fee. Dual Tone laminate is available (differing inside and outside laminate selections) will incur an additional fee.
Some of these patterns/colors are also available for tables.... hence the +
Actual colors may differ slightly from displayed representations. These finishes now have a 30 Sheen finish.