• Work surface: Tops are 11⁄4” thick, three ply 45# particle board construction with .050” high pressure laminate top surface and a .030” phenolic backer. Edge is 3mm PVC with a 1/8” radius top and bottom. Tops are attached to the frames and mounted via 1/4”-20 inserts and bolts. Top surface is at 35” height. Lower work surface is at 29” height.

• Case: Floating curved front panels are self-edged high pressure laminate. Face panels have embedded threaded metal inserts to accept machine threaded connecting hardware for metal-to-metal fastener contact to steel chassis frames. End panel inserts are self- edged high pressure laminate panels.

• Steel Chassis Frame: Frame shall be a welded assembly of 1-1/4” square 14 gauge steel tube, drilled and tapped to receive casters and bored for connecting hardware. Finish shall be powder coat, manufacturer’s standard colors.

• Casters: Casters shall be 100mm heavy duty swivel casters with brake, rated at 100# per caster. Assembled unit shall use a total of (5) casters.

• Accessory Hanging Pedestal: Hanging pedestal shall be steel construction with satin nickel loop recessed pulls, locking mechanism, 1 box drawer, 3/4 extension slides, 1 file drawer, full extension slides, 15.25” width x 17.875” depth x 19.375” height. Hanging pedestal shall be provided uninstalled.

Overall Dimensions
Upper work-surface
Height: 35", 45"
Depth: 9"
Lower work-surface
Height: 29", 39"
Depth:24", 30"
Widths: 75", 84"