Drift Concave and Convex Shelving

• Available in HPL or TFL with 3mm PVC edges and Oak or Maple veneer with 3mm wood edges
• Backs are available in HPL, TFL or powder coated steel *TFL single faced unit swill receive a steel back.
• 75mm casters are standard
• The footprint of each single faced Drift Curved shelving unit is an 18" deep, 60˚ section of a 72" circle
• Double-faced Drift curved shelving is 24" deep with shelving on both sides. * Double-faced shelving always receives steel backs
• Available heights: 30", 36", 42", 48"
• Steel bumpouts are designated in the model number using SB
  Example: DFTS-4218X-SB-L-MOB is a 42"H Convex Unit with Steel bumpouts 

Drift Straight Shelving

• Available in HPL or TFL with 3mm PVC edges and Oak or Maple veneer with 3mm wood edges
• Backs are available in HPL, TFL or powder coated steel 
• 75 mm casters are standard
• Available depths: 18", 24
  *18"D DRIFT units with connecting magnets are designed to connect with only 18"D DRIFT units.
  *24"D DRIFT units with connecting magnets are designed to connect with only 24"D DRIFT units.
• Available widths: 42"
• Available heights:  42", 48" heights
  
  

Drift Picture Book Shelving

• Available in HPL, 3mm PVC edges
• 4 adjustable shelves on each side
• Attached curved steel support at the rear of the shelf supports the Picture Book Divider panels
• Picture book dividers are available in HPL with clear coated edges
• Available in curved or straight units
• Available heights: 42”, 48"

Note: All Drift units over 48"H receive a "fixed" adjustable shelf. The shelf is adjustable, but will require a screwdriver to make the adjustment.

Optional handles and magnets (to specify add “H” after DFTS for handles and magnets i.e. DFTSH)