• Work surface is 1-1/4" thick, three ply engineered wood construction with .050" high pressure laminate and a phenolic backer sheet. The front edge is 5/8" x 1-5/8" solid red oak with a 1/2" radius all around (B) OR a 1/2" bevel top and bottom (BB). Work surfaces are attached to the side and back panels with (3) steel brackets. Grommets are standard.
• Legs are 1-5/8" solid glued up red oak and predrilled to receive shoulder screws. Each leg is equipped with a t-nut, black plastic adjustable glide.
• End/intermediate panels are 1", nine ply hardwood plywood with select red oak veneer on both faces. The top and bottom edges are banded with 1/8" solid red oak. Each panel is joined to a leg using Mod-eez clips.
  
  
• End/intermediate panels: intermediate panels are 1-3/16" thick, three ply engineered wood with select red oak veneers on both sides. The panels are banded with 1/8" solid red oak on the top, bottom and front edge. Panels are attached to each other with Mod-eez fasteners.
• Each panel is equipped with an adjustable glide.
• Hex Lid: The hex lid is 1-1/4" thick three ply engineered wood construction with .050" HPL face and a phenolic backer sheet. The lid is supported by 3 metal brackets.
• Available in single and double face units.
• Starter adder construction.
• Quad carrel version available.
  

Overall Dimensions

Height: 48"
Starter widths: 36-7/8", 50-3/8"
Adder widths: 35-7/8", 49-3/8"

Hex Overall Dimensions
Height: 48"
DIA: 96", 120
* Available in full or half