Baron - mediatechnologies

BRU-3231

Add to My Project Board

Log in or create an account to create a project board.

Baron - mediatechnologies

BRU-3255

Add to My Project Board

Log in or create an account to create a project board.

Baron

Robust... yet simple, sturdy... yet soft. Baron lounge seating is tough enough to withstand hours of use, yet cozy enough to want to test that theory. Solid 3" oak or maple legs are capped with steel plates and equipped with leveling glides and provide a sturdy base for the flat hardwood arms to rest upon. 5" thick seat cushion sits upon 1" ply platform with powder coated steel support frame, back cushion is 4" thick and gently slopes back for comfort. Choose oak or maple veneer finish, powder coat color and fabric to fit your color theme. Side panels allow you to choose from hardwood veneer finish or upholstered cushion.

See Full Description

Cut Sheets
AutoCAD
Hi-Res Images
List Price Sheets

  • General Construction: Hardwood members are doweled and glued. Additional reinforcement at critical joints is provided with steel brackets or welded tabs and screws.
  • Legs: Legs are solid [specify oak or maple], 3” square in section. The bottom of each leg is capped with a 3 1/4” square x 1/4” steel plate, centered on the bottom of the leg and allowing for passage of a leveling glide. 4” rear legs are taller than front legs.
  • Chair Back and Seat: Upholstered foam cushion interior. Fabric must be specified. 5” seat cushion rests on a 1” plywood platform that is attached to the side panels and a back support rail. Rear cushion is vertical in profile for the first 4” above the seat and then slopes back for comfort. Upper portion of back cushion extends over the back panel.
  • Arms: Chair arms are flat hardwood members. Front of arm rests on an exposed powder coat finished 1 1/2” diameter steel post attached to the top of each front leg. Rear of the arm rests on the top of the rear leg.
  • Steel Front Seat Support: The front of the seat is supported by a 1” x 2” rectangular steel tube running between the front legs. Tube is exposed and powder coat finished.
  • Side Panels: Side panels are structural frames using 3”W hardwood rails that are doweled into front and rear legs and a panel running between the rails that shows finished matching hardwood veneer face, flush to the inside face of the rails. Outer face of the panel is flush to the outside of the rails and legs may be specified as either hardwood veneer or upholstered cushion. Fabric must be specified if upholstered option is chosen.
  • Back Panel: 1-3/16” thick engineered wood panel running between the rear legs and above the arms.


Overall Dimensions
Depth: 31"
Widths: 31", 55.5"
Overall Height: 32"
Seat height: 16"

Fabrics

Finishes

Natural Oak - NO 30
Finishes on Oak - Standard

OPTIONS: 7

Actual colors may differ slightly from displayed representations. These finishes now have a 30 Sheen finish.

Natural Maple-NM 30
Finishes on Maple - Standard

OPTIONS: 6

Actual colors may differ slightly from displayed representations. These finishes now have a 30 Sheen Finish.

Silver 809
Powder Coat Colors

OPTIONS: 15

Classic to funky finishes available. Match your powder coats with your PVC for fresh and fun look! All chairs are available in G2 powder coat colors. Tables may also be specified with G2 powder coat colors. There is a one time charge per order/color for these powder coats.