Heritage - mediatechnologies

H3060T

Add to My Project Board

Log in or create an account to create a project board.

Heritage - mediatechnologies

Add to My Project Board

Log in or create an account to create a project board.

Heritage

Heritage tables are classic, traditional library tables. The tops are high pressure laminate, the legs are solid red oak and each awaits your finish choice. Aprons span between legs and are fixed to the table top and legs to add rigidity and elegance. The Panel end version incorporate mission style detail that can be that of the same finish, or mix things up a bit to accentuate the detail. Panel end with open slats are also available for more of an open look. Each leg is equipped with a t-nut adjustable black plastic glide. 

See Full Description

Cut Sheets
AutoCAD
List Price Sheets

  • Tops are 1-1/4" thick, three ply engineered wood construction with .050" high pressure laminate and phenolic backer sheet. The Heritage edge is 5/8" x 1-1/4" solid red oak with 1/8" round-over radius top and bottom. Tops 60" and over are supported on the underside with a 14 gauge steel keel.
  • Legs are 2-1/2" solid red oak with a 1/4" round-over radius on all long edges. They are attached to the top by  means of a 5" x 5/16" steel plate. The leg and the plate are joined by (2) 5/16-18 machine bolts screwed into a 1/2" diameter steel barrel nut which is embedded in the leg. The steel plate is attached to he table top by (5) 5/16-18 machine bolts which screw into 5/16-18 metal inserts embedded in the top. Each leg is equipped with a leveling glide.
  • Detail: A mission style detail of 7/8" x 2" solid red oak upper and lower rails with a 5/8" x 2-1/2" solid red oak vertical slat flanked by 1-1/2" W vertical slats spans between legs on each narrow end of a table. Tables 30" and wider receive 5 slats total and tables under 30" wide receive 3 slats total. Detail is not applied to square or round tables.
  • Apron: the apron is 1" x 2" with a hard sand break on exposed edges. Aprons are machined on inside the face at each end to receive a 12 gauge steel bracket which, when fastened to the aprons, forms a structural frame that supports the top. Mounting bolts pass though the brackets at each corner of the frame into the legs and when tightened, rigidify the entire assembly. Aprons are machined on their inside faces with pocket holes and #8 screws pass through these to attach the table top.

Overall Dimensions
Heights: 27", 29"
Widths: 24", 30", 36", 42", 48"
Lengths: 36", 42", 48", 60", 72"

Finishes

Natural  Maple - NM
Finishes on Maple - Standard

OPTIONS: 7

Actual colors may differ slightly from displayed representations.

Natural Oak - NO
Finishes on Oak - Standard

OPTIONS: 7

Actual colors may differ slightly from displayed representations.

Formica Elemental Stone8831
Laminates for Tables

OPTIONS: 27

Choose from any currently available standard high pressure laminate from Formica: Premium patterns or surface finishes may be specified but will incur an up-charge. Please contact factory.

Related Products